See the thread here for a recent post about using topas Bragg in RMCProfile.

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Issue with RMCProfile V6.7.9 Linux GPU Request for Assistance
#5
Thank you very much for your detailed feedback and guidance, and for taking the time to thoroughly review my input files. 
 
I have followed your suggestions and made the following changes: 
1. Rebinning of the input data has been performed. 
2. Enabled 'FITTED_OFFSET' alongside 'FITTED_SCALE'. 
3. Adjusted the 'SAVE_PERIOD' to '10 MINUTES'. 
 
However, despite these changes, I am still encountering the same error, and the calculation stops. 
 
I have not yet implemented the weight optimization as I believe it may not be directly related to the issue we are currently facing. 
 
Additionally, I would like to mention that when using the CPU version of RMCProfile (version 6.7.9.4) with the same input files, excluding the GPU options, the simulation runs without any errors. This issue seems to be specific to the GPU version. 

 
For your information, I have gone through the tutorials and the manual, though only briefly, to familiarize myself with the package. 
 
I have attached the current input file and log file (nohup.out) for your review. Could you please provide further guidance on how to resolve this issue? 
 
Thank you once again for your support, assistance, and the valuable time you have spent on reviewing my files.


Attached Files
.zip   240912_TiO2_powder_GPU.zip (Size: 484.45 KB / Downloads: 1)
Reply


Messages In This Thread
RE: Issue with RMCProfile V6.7.9 Linux GPU Request for Assistance - by riekasa - 09-12-2024, 04:57 AM

Forum Jump:


Users browsing this thread: 4 Guest(s)